CID12232--WizFlow Flowcharter Pro 7.26.2196 流程圖製作軟體 英文破解版
CID12236--ACDSee Ultimate 2024 v17.1.0.3778 圖片管理、瀏覽與編輯軟體 繁體中文旗艦版
DVD29567--Bricsys BricsCAD Ultimate 24.2.04.1 x64 強大的CAD軟體 英文破解版(DVD一片裝)
DVD29568--DxO ViewPoint 4.16.0 強大的照片比例校正軟體 英文破解版(DVD一片裝)
DVD29569--GibbsCAM 2024 24.0.62.0 x64 用於數控機床工具編程的先進CAM軟體 英文破解版(DVD一片裝)

破解說明:序號和破解檔....在光碟機 \crack\



軟體簡介:

Specctra Router v10.1.1 英文正式版


【軟體簡介】

■ 軟體售價：台幣 2500 元

印刷電路版設計的EDA工具,PCB設計用自動配置,配線工具.


What's new in SPECCTRA 10.1.1

The following enhancements have been incorporated into SPECCTRA version 10.1.1.
This version is available only through our dedicated web site
http://www.specctra.com.
This web site has been dedicated to our user community. The site demonstrates
our commitment to sustaining SPECCTRA's world class status as the only autorouting
environment that is able to handle today's most complex designs.

Miter Improvements

With prior releases of SPECCTRA, Miter did not always produce results that were
ideal for manufacturing. Also, Miter results would not always adhere to all
constraints, especially electrical constraints such as differential pairs and length
controlled nets.
These mitering deficiencies could pose a significant delay in the cycle time of
a board design if manual clean-up was required.
For this release of SPECCTRA 10.1.1, Miter has been significantly enhanced to
produce far better diagonalization of traces in open areas, into pins and vias, and on
traces with electrical constraints.

Specifically..

- Miter will now produce many more mitered 45 degree corners than in previous
releases.
This is the result of applying more intelligent methods to determine optimal
setbacks from the corners.
- The miter function will now generate longer mitered connections to produce
cleaner, more manufacturable routing patterns.
- Mitering produces improved 45 degree pin entries for both circular and
rectangular pins, including SMD pins. For rectangular pins, miter will now create
clean diagonals from the corner locations.
- Differential pairs are now fully recognized and mitered, adhering to all
constraints.
This is a significant improvement for high speed designs where differential
pairs are widely used. The new algorithm will also adjust length accordingly to meet
min, max, and matched length.
- Miter has been enhanced to adhere to both minimum and maximum length rules, to
ensure that the length rules are not violated. Miter will automatically add length,
if space is available, in cases where mitering reduced length below the minimum
tolerance.
- Other enhancements were made to the general quality of mitering, based on customer
feedback.

Propagation delay and elongation controls

SPECCTRA now handles propagation delay and elongation patterns more efficiently,
and users have greater control over how these processes work. In past releases, users
did not have the appropriate controls to manage elongation and, as a result, were
sometimes forced to use manual editing to clean up the routing.

- New elongation controls, min gap, min amplitude, max amplitude, and max run
length, have been added to allow better control. (Note: The new Meandor and Sawtooth
patterns will be available in the upcoming 10.2 Release.)
- The values for gap, and for minimum and maximum amplitude for Accordion and
Trombone are now enforced more strictly during routing.

Quality improvements

At the 2000 CCT User's Group conference, we committed ourselves to making
continuous quality improvements in SPECCTRA. As part of this initiative, we are
committed to tracking and working on the user community's Top 25 PCR's.
The following list shows just some of the PCR's that we have fixed in this
release. These PCR's are "in addition to" those uncovered during normal testing
and those related to major focus areas.

365069:
SPECCTRA aborts with system error during route pass 1
361112:
Router crashes at start of fanout or route pass
366919:
Some system variables change from integer to string type on Windows platform
360915:
Buried via gap check broken in v9 and v10
365060:
Net and Pin System Variables do not work in v8, v9 and v10
361314:
Router does not follow ordered nets in some cases
376815:
Unroutes when end of protected preroute is on forbidden layer
374243:
SPECCTRA guides going to the wrong locations
351242:
Documentation error for set stub_viols_cost command
388810:
Fanout creates redundant vias on BGA
361317:
Can"t turn off match_fromto in Rules->group->timing form
361321:
Can't turn off matched or relative length/delay using GUI
365011:
Length conflicts are not ignored when protected
377574:
Need Length report to display selected nets/fromto rules